- Mon, Tue, Wed, Thur, Fri 8AM - 10PM (EST)
- Sat 9AM - 6PM (EST)
- Sun 1PM - 7PM (EST)
"Great prices, excellent customer service, and easy shopping online!" - customer on May 12, 2013
ART Pro VLAII 2-Channel Compressor
The ART Pro-VLA II is a tube driven Vactrol-based Compressor and Leveling amplifier designed to excel in any professional audio application, including tracking, mixing, mastering, live sound or broadcast situations. >More
ART DTI Hum Eliminator Processor
The DTI (Dual Transformer/Isolater) is a high-quality, totally passive audio interface that uses a pair of high-performance transformers to totally separate input and output signal grounds, thereby isolating two systems and reducing hum and ground-loop noise. The DTI's audio transformers have an extremely flat and wide frequency response and can handle high signal levels while maintaining an isolated balanced output. >More
ART S8 8-Channel Microphone Splitter
The ART S8 Microphone Splitter can be used to split eight balanced low impedance microphone signals into sixteen (eight pairs). Each channel of the S8 provides one direct output and one transformer-isolated output from a single microphone. >More
The SLA-1 Studio Linear Amplifier is a robust yet compact power amplifier designed for studio and even live applications. It has been designed and engineered to provide clean, quiet power and excellent sound with ultra-low noise and distortion. >More
The Zdirect is a high-quality, totally passive interface that lets you connect instrument-, line-, or speaker-level signals to a mixer or other balanced input through a high-performance audio isolation transformer. The high impedance single-ended 1/4 in. input is converted by the transformer into an isolated balanced low impedance signal source. >More
ART SplitCOM Pro Mic Splitter/Combiner
Use the SPLITCom Pro to Split or Combine balanced low impedance microphone signals. As a Splitter: The SPLITCom Pro provides one direct-coupled output and one isolated output from a single microphone. As a Combiner: The SPLITCom Pro provides one output from two microphone inputs. >More
ART HeadAmp4 4-Channel Headphone Amp
Ideal for virtually any home or project studio, the ARTcessories HeadAmp4 easily adds additional headphone outputs to any mixer, computer audio interface, workstation, iPod, media player or laptop without creating any additional load on the existing headphone source. >More
ART SLA4 Studio Linear Amplifier
Offering superb sound quality, the ART SLA4 studio linear power amplifier delivers the clean power you need for any professional audio application including project or professional studio environments or commercial sound installations. >More
The DJ PRE II is a high quality phono preamp designed for your home and studio. It acts as an interface between your turntable and your audio recording system. The analog input capacitance can be switched between 100pf and 200pf to optimize your phono cartridge response. A switchable low cut filter removes rumble while leaving the audio pristine. The front gain trim control and signal/clip LED allow you to optimize the preamps gain for a wide range of input sources. >More
ART HeadAmp6 Pro 6-Channel Headphone Amp
The ART HeadAMP6 Pro 6 Channel Headphone Amplifier has everything you need in a headphone amp. The HeadAMP6 delivers six independent high-power headphone outputs, each with bass and treble controls with dual function pan/mix control per channel. Along with Stereo aux input for each channel and multiple monitoring settings per channel. Precision eight-segment LED bar graph per channel. Front panel main insert jack. Front- and rear-mounted headphone jacks. XLR and 1/4 inch main inputs and outputs. Parallel main outputs for multiple unit use. >More
ART Phantom I Phantom Powered DI Box
A 24-volt condenser mic will run perfectly on 48 volts. In fact, mics rated at as little as 9 volts can often operate on 48 volts, but you should check with the manufacturer first. Conversely, a mic will generally perform best driven by not less than its rated voltage so, for a 48-volt mic, you would obtain best results with 48 volts of phantom power. The Phantom I is a great choice for these needs. >More
ART S83WAY 8-Channel Microphone Splitter
The S83WAY eight channel three way microphone splitter is ideal for live sound, recording and broadcast applications where microphone and XLR balanced line level input signals have to go to multiple mix locations. >More
ART SyncGEN Wordclock Generator
The ART SyncGen is a simple to use and inexpensive way to improve the sound of your digital recording gear and eliminate seemingly random pops and clicks resulting from synchronization timing errors between different pieces of equipment. >More
Built into the PS 4x4 is a surge and spike protection system, designed to protect powered equipment from harmful electric surges and spikes. The unit also has RFI and EMI filtering, a 15 amp breaker, and a total power capacity of 1800 watts. The PS 4x4 also features a front-located on/off power switch (which lights up when turned on), and a front-mounted circuit breaker reset switch. The rugged, all-steel chassis occupies 1U rack spaces and is intended for installation into standard 19 in. equipment racks. >More
ART's latest amplifier stems from the success of their popular 100-watt SLA-1. For all of you power-hungry audio enthusiasts, ART presents to you the more powerful SLA-2. The SLA-2 is a studio linear power amp that delivers 200 watts of clean, clear power, and will help reproduce your mixes with near-pinpoint accuracy inside a single rack space. >More
The T8 (Transformer Eight) is a totally passive audio interface that uses 8 transformers to separate input and output signal grounds, thereby isolating two systems and reducing hum and ground-loop noise. The T8's audio transformers have flat and wide frequency response and handle high signal levels while maintaining an isolated balanced output. The transformers are wound for 1:1 unity gain and are designed to be used with impedances from 600 ohms to 100k ohms. >More
ART Prosplit 2-Way Microphone Splitter
The ProSplit provides one direct output and one transformer isolated output from a single microphone. Applications include sending the direct output to the main or Front-of-House mixer, with the second isolated output being sent to a monitor or recording mixer. >More
A/B-Y switching works two ways. It lets you switch a common source signal (guitar, bass or keyboard) between two amplifiers or amp channels. Or conversely, it lets you switch two source signals (ie, two different guitars) into the same amplifier. A good quality A/B-Y switcher will also provide LEDs or other indicators to show whether A, B or Y routing is in effect. The Y routing combines both the A and B outputs in parallel so that two amplifiers can be driven at once. The Coolswitch provides full A/B-Y switching functionality, plus parallel Common in/out jacks. >More
Copyright ©2013. This site is protected by copyright. There are terms for its use. Send us Feedback on our site and your experiences. Our descriptions, pictures, and prices are mostly accurate, but cannot be guaranteed. Cookies should be enabled in your web browser for full site functionality (details).