Behringer B5 Dual Capsule Condenser Microphone with Case
2 interchangeable capsules. Includes case, stand adapter and windscreen.
Product rated 8.5 out of 10 (8 ratings)
Personal use items that are used at your mouth or in your ear cannot be returned once opened due to health laws. This includes all microphones, guitar talk boxes, ear plugs, and in-ear earphones.
We DO NOT COLLECT TAX except on orders shipped to New Jersey.
RECOMMENDED ACCESSORIES:
- Shure PG58 Vocal Mic
- from $60
- Shure SM58 Microphone
- from $99
- OnStage Boom Mic Stand
- from $30
ADDITIONAL VIEWS:
Main
Alternate View
PRODUCT DESCRIPTION
The B-5 is a professional gold-sputtered diaphragm condenser microphone featuring 2 interchangeable capsules for different pickup patterns (cardioid and omnidirectional). It is perfect for acoustic instruments, vocals and overhead miking. Its ultra low-noise transformerless FET input eliminates low-frequency distortion. Its -10dB attenuator can be used with high volume signal sources, while the low-cut filter eliminates floor rumble. The B5 includes a rugged hard case, stand adapter and windscreen. Frequency response: 20Hz-20kHz, requires 48V phantom power.
Features:
Professional true condenser microphone for studio and live applications
2 interchangeable capsules with cardioid and omnidirectional pickup patterns
Low-mass gold-sputtered diaphragm for ultimate sound reproduction
Perfect for acoustic instruments, voice and overhead, etc.
Ultra low-noise transformerless FET input eliminates low-frequency distortion
Smooth, super0-wide frequency response and incredible musicality
Switchable low-frequency roll-off and -10dB input attenuation
Gold-plated 3-pin XLR output connector
Rugged construction with satin nickel-plated brass body
Custom microphone stand adapter, windscreen and transport case included
Features:
Professional true condenser microphone for studio and live applications
2 interchangeable capsules with cardioid and omnidirectional pickup patterns
Low-mass gold-sputtered diaphragm for ultimate sound reproduction
Perfect for acoustic instruments, voice and overhead, etc.
Ultra low-noise transformerless FET input eliminates low-frequency distortion
Smooth, super0-wide frequency response and incredible musicality
Switchable low-frequency roll-off and -10dB input attenuation
Gold-plated 3-pin XLR output connector
Rugged construction with satin nickel-plated brass body
Custom microphone stand adapter, windscreen and transport case included
TECHNICAL DESCRIPTION
Transducer Type: True Condenser, 18mm
Operating Principle:
- Cardioid: Pressure Gradient:
- Omnidirectional: Pressure gradient
Polar Pattern:
- 1 x Cardioid
- 1 x Omnidirectional, exchangeable
Connection: Gold-plated balanced XLR connector
Open Circuit Sensitivity (at 1kHz):
- Cardioid: -38dBV (0 dBV=1 V/Pa), 12.6 mV/Pa
- Omnidirectional: -40dBV (0 dBV=1 V/Pa), 10 mV/Pa
Frequency Response: 20Hz - 20kHz
Level Attenuation: -10dB (switchable)
Low-Cut Filter: 6dB/octave at 150Hz (switchable)
Maximum SPL (1% THD @ 1kHz):
- 140dB (0dB)
- 150dB (-10dB)
Equivalent SPL (IEC 651):
- Cardioid: 16dB-A Omnidirectional: 18dB-A
Signal-to-Noise Ratio:
- Cardioid: 78dB A-weighted
- Omnidirectional: 76dB A-weighted
Nominal Impedance: 70 Ohms
Load Impedance: >1 kOhm
Supply Voltage: +48V
Supply Current: 3 mA
Dimensions:
- Shaft Diameter: 20mm
- Length: 120mm
Weight: Approx 0.09 kg (0.21 lbs.)
Operating Principle:
- Cardioid: Pressure Gradient:
- Omnidirectional: Pressure gradient
Polar Pattern:
- 1 x Cardioid
- 1 x Omnidirectional, exchangeable
Connection: Gold-plated balanced XLR connector
Open Circuit Sensitivity (at 1kHz):
- Cardioid: -38dBV (0 dBV=1 V/Pa), 12.6 mV/Pa
- Omnidirectional: -40dBV (0 dBV=1 V/Pa), 10 mV/Pa
Frequency Response: 20Hz - 20kHz
Level Attenuation: -10dB (switchable)
Low-Cut Filter: 6dB/octave at 150Hz (switchable)
Maximum SPL (1% THD @ 1kHz):
- 140dB (0dB)
- 150dB (-10dB)
Equivalent SPL (IEC 651):
- Cardioid: 16dB-A Omnidirectional: 18dB-A
Signal-to-Noise Ratio:
- Cardioid: 78dB A-weighted
- Omnidirectional: 76dB A-weighted
Nominal Impedance: 70 Ohms
Load Impedance: >1 kOhm
Supply Voltage: +48V
Supply Current: 3 mA
Dimensions:
- Shaft Diameter: 20mm
- Length: 120mm
Weight: Approx 0.09 kg (0.21 lbs.)
REVIEWS
Product rated 8.5 out of 10 (8 ratings)
