MORE RESOURCES
FIND SIMILAR PRODUCTS
Because this item is used at your mouth or ear, it cannot be returned once opened due to health reasons.
Payment Options Buying for a school, government organization, or house of worship? Pay by invoice! Details We DO NOT COLLECT TAX except on orders shipped to New Jersey.
RECOMMENDED ACCESSORIES
Maintaining the Audio-Technica tradition of clear and transparent sound quality, the U853A cardioid condenser hanging microphone is ideal for speech, theater, orchestra and choir sound reinforcement and recording. The microphone's fast transient response and low distortion characteristics allow every complex detail to be heard with all its impact--rich, vibrant qualities faithfully reproduced. Equipped with UniGuard innovations that offer unsurpassed immunity from radio frequency interference, the U853A accepts interchangeable elements, available in cardioid, hypercardioid, omnidirectional and UniLine( line cardioid polar patterns. The battery- or phantom-powered microphone also offers an 80 Hz low-cut UniSteep filter that reduces pickup of low-frequency ambient noise.
Features
Designed for suspension over choirs, instrumental groups and theater stages
Superior off-axis rejection for maximum gain before feedback
UniGuard RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
UniSteep filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
Accepts interchangeable elements to permit angle of acceptance from 90* to 360*
Low-profile design with low-reflectance finish for minimum visibility
Available in two colors: black (U853A) and white (U853AW)
Operates on battery or phantom power
Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Cardioid
Freq. Response: 30-20,000 Hz
LF Freq. Roll-Off: 80 Hz, 18 dB/octave
Open Circuit Sensitivity: Phantom: -42 dB (7.9 mV) re 1V at 1 Pa
Battery: -43 dB (7.0 mV) re 1V at 1 Pa
Impedane: Phantom: 200 ohms
Battery: 270 ohms
Max. Input Sound Level: Phantom: 133 dB, 1 kHz at 1% T.H.D.
Battery: 123 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range (typical): Phantom: 109 dB, 1 kHz at Max SPL
Battery: 99 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio: 70 dB, 1 kHz at 1 Pa
Phantom Power Requirements: 11-52V DC, 2 mA typical
Battery Type: 1.5V AA/UM3
Battery Current / Life: 0.4 mA / 1200 hours typical (alkaline)
Switch: Off, on-flat, on-roll-off
Weight (Mic): 0.5 oz (14 g)
Weight (Power Module): 4.9 oz (139 g)
Dimensions (Mic): 1.34 in. (34.0 mm) long,
0.48 in. (12.2 mm) diameter
Dimensions (Power Module): 3.31 in. (84.0 mm) H x
2.48 in. (63.0 mm) W x
0.87 in. (22.0 mm) D
Output Connector (Power Module): Integral 3-pin XLRM-type
Cable: 25.0 ft (7.6 m) long (permanently attached to microphone), 0.13 in. (3.2 mm) diameter, 2-conductor, shielded cable with TA3F-type connector
Accessories Furnished: AT8153 two-stage foam windscreen; AT8451 steel hanger; AT8531 power module; AT8438 5/8 inch-27 stand adapter; battery
Audio-Technica Case Style: M12
Copyright ©2009. This site is protected by copyright. There are terms for its use. Send us Feedback on our site and your experiences. Our descriptions, pictures, and prices are mostly accurate, but cannot be guaranteed. Cookies should be enabled in your web browser for full site functionality (details).