Product Description

The REV2496 is a reference-class reverb modeler that simulates some of the world's most renowned reverb processors. It features two independent effects processors with both analog and digital connectors, 8 high-end reverb algorithms, modulation effects, and stereo Compression. Its high-quality 24/96 converters plus full 96kHz operation with both effects processors (all 4 channels!) guarantees absolute high-end performance.

A full-featured digital interface with AES/EBU and optical S/PDIF I/O, Wordclock In and MIDI capability allow flexible integration with other digital equipment. Navigating the REV2496 is intuitive and easy, with soft push/turn encoders, a big preset wheel, a high-resolution LCD display and a TAP button. Separate ROM and user preset banks put a total of 400 presets at your fingertips - and open architecture allows future software updates via MIDI. Balanced inputs, servo balanced outputs on XLR and 1/4 in. TRS connectors.

Features:
Reference class reverb modeling processor with high quality 24-bit/96kHz A/D and D/A converters

Full 4-channel operation up to 96kHz without any limitations, providing two separate effects processors in one unit

8 high end reverb algorithms, modeled after world class reverb processors

Additional high quality modulation effects from X-over Delay to Chorus/Flanger plus stereo Compressor

Full Featured digital interface with AES/EBU in/out, optical S/PDIF in/out, Wordclock in, and MIDI function for flexible use with digital equipment

Ultra high-resolution SHARC processor with 32-bit internal signal processing for ultimate sonic resolution

10 different routing types for flexible assignment of analog and digital connectors to both stereo engines

Innovative user interface with soft push/turn encoders, big preset wheel, high-resolution graphic LCD display and additional TAP button for delay times

Direct access to 4 effect parameters makes editing easy and comfortable

Intuitive editing of up to 30 parameters using specially designed graphic mode

Separate ROM and user preset banks with 400 presets total

Balanced inputs and servo-balanced outputs and gold-plated XLR and 1/4 in. TRS connectors

Open architecture allows future software updates via MIDI

Internal switch mode power supply for maximum flexibility (100-240V~), noise free audio, superior transient response plus lowest possible power consumption for energy saving

Designed in Germany. Manufactured under ISO9000 certified management system

Technical Description

Analog Inputs:
- XLR Balanced
- 1/4 in. TRS stereo balanced

Input Impedance: approx. 22k ohms balanced

Maximum Input Level: +16 dBu

Analog Outputs:
- XLR Servo-Balanced
- 1/4 in. TRS stereo servo-balanced

Digital Input 1:
- Type: XLR servo-balanced
- Standard: AES/EBU or S/PDIF
- Input Impedance: 110 ohms
- Nominal Input Level: 0.2-5v peak to peak

Digital Input 2:
- Type: TOSLINK optical
- Standard: AES/EBU or S/PDIF

Digital Output 1:
- Type: XLR servo-balanced
- Standard: AES/EBU or S/PDIF

Digital Output 2:
- Type: TOSLINK optical
- Standard: AES/EBU or S/PDIF

Sync Input:
- Type: BNC
- Standard: WordClock (1x sample rate)
- Input Impedance: approx 50k ohms
- Nominal Level: 2-6v peak-to-peak

MIDI Interface:
- Type: 5 Pin DIN jacks In/Out/Thru

Dimensions: 19 x 1.75 x 8.5 in. (482.6 x 44.5 x 217 mm)

Weight: 4.75 lbs (2.15kg)

Product Rated 9.1 Out of 10 (7 ratings)

7 users have rated this product, but no one has reviewed it yet. To rate this item and/or write a review, click the "Rate It" button.