- Mon, Tue, Wed, Thur, Fri 8AM - 10PM (EST)
- Sat 9AM - 6PM (EST)
- Sun 1PM - 7PM (EST)
This product has been discontinued or is no longer sold by SameDayMusic.
We recommend this product instead:
Mackie C300z Compact Passive 2-Way Loudspeaker (1x12 in.)
$480
Designed for optimum performance with Mackie powered mixers and power amps, the C300z is a passive version of Mackie's popular SRM450 portable active loudspeaker. The C300z, an updated version of the current Mackie C300, features an injection-molded composite chassis that is rigid enough to prevent unwanted vibrations and standing waves inside the cabinet, but light enough to keep any touring musician out of traction well into their 70s. > MoreShop our website for related products:
(In most cases, a product is unavailable because it has been discontinued by its manufacturer.)
FIND SIMILAR PRODUCTS
Product Description
The C300/C300i uses the same basic transducers as the active SRM450 - with 2 differences. TheC300/C300i's 1.75 in. high frequency compression driver uses a composite mylar diaphragm; the 12 in. low frequency transducer incorporates a 3 in. Inside/Outside temperature-resistant voice coil. Both of these compensate for the fact that the speaker system must be able to handle a wide range of external power inputs (including the mega-powered PPM808S or PPM808M).
The C300/C300i uses the same studio-quality horn assembly with multi-cell aperture horn throat and large format exponential/conical high-frequency horn mouth for superb dispersion. This means everyone in your audience hears clearly...not just the people in the middle between the speakers.
And like the SRM450, the C300/C300i has the same asymmetrical trapezoidal cabinet for minimum internal resonance and the ability to recline for floor monitor use. And the same weight-balanced enclosure with dual side handles and top handle, built-in pole mount, and 10 built-in hanging points. But instead of internal amplification, the C300/C300i has a Low-Impedance Compensated Crossover (LICC) with full built-in transducer protection and Speakon or TS (Tip-Sleeve) inputs that just beg to be energized to shock volumes with a PPM mixer or FR Series power amplifier.
Technical Description
Low-Frequency Transducer
Diameter: 300 mm (12 in.)
Voice Coil Diameter: 76.2 mm (3 in.)
Sensitivity (1W@1m): 98 dB
Nominal Impedance: 8 ohms
Power Handling: 300 watts
Frequency Range: 50Hz - 3000Hz
Hi-Frequency Driver and Horn
Diaphragm Diameter: 44.5 mm (1.75 in.)
Exit Throat Diameter: 24.5 mm (1 in.)
Diaphragm Material: Mylar
Sensitivity (1W@1m): 106 dB
Nominal Impedance: 8 ohms
Power Handling: 150 watts
Frequency Range: 1000Hz - 20,000Hz
Horn Type Composite: Exponential and Conical
Mouth Size (W x H): 304.8 x 177.8 mm (12 x 7 in.)
Horizontal Coverage: 90Á ±10Á (1kHz - 20kHz)
Vertical Coverage: 45Á ±10Á (2.8kHz - 20kHz)
Physical Properties
Dimensions (H x W x D): 66.0cm x 39.6 x 37.5 mm (25.98 x 15.58 x 14.75 in.)
Weight: 19.5 kg (43 lbs.)
Enclosure Geometry: Asymmetrical Trapezoidal
Mounting Methods: Integrated mounting points, (10mm x 1.25mm), 2 each located on each side, top, bottom, and rear of enclosure
System
Input Type (C300i): 1/4 in. phone jack
Input Impedance: 8 ohms
Maximum Input Power: 300 watts
Enclosure Alignment: Sixth-Order
Over-Excursion Protection: Second-Order High-Pass Filter
Acoustic Frequency Response: 70Hz - 16,000Hz
Low-Frequency -3 dB Point: 55Hz
Maximum SPL @ 1m: 126 dB
Low-Frequency Crossover Type: 24 dB/octave, time offset corrected
High-Frequency Crossover Type: 24 dB/octave
Crossover Frequency: 1800Hz
Driver Protection: Dynamic protection for compression driver
Operating Temperature Range: -10Á C - 45Á C (14Á F - 113Á F)
Mackie C300I Sound Reinforcement Speaker Reviews
Recently Viewed:
Your Interests:
Copyright ©2010. This site is protected by copyright. There are terms for its use. Send us Feedback on our site and your experiences. Our descriptions, pictures, and prices are mostly accurate, but cannot be guaranteed. Cookies should be enabled in your web browser for full site functionality (details).