Toll Free 866-SHIP-SDM (866-744-7736) Mention service code 200-KVP5 Hours

    Mackie MR10Smk3 Powered Studio Subwoofer

    This product has been discontinued or is no longer sold by SameDayMusic.

    Shop our website for related products:

    (In most cases, a product is unavailable because it has been discontinued by its manufacturer.)

    Mackie MR10Smk3 Powered Studio Subwoofer Product Description

    Delivering the powerful, deep bass your music deserves, the Mackie MR10Smk3 Powered Studio Subwoofer is designed for high-output low end performance. The low-profile enclosure is rear-ported to provide smooth, even bass that adds to the character of your music and also features vibration-absorbing rubber feet to minimize unwanted resonances. Optimizing features include an adjustable crossover to dial in the right amount of low end for your studio plus a polarity switch to make sure your mix is always in phase. Adding an MR10Smk3 studio subwoofer to your studio not only delivers the added bass your music demands, it is perfectly matched to MRmk3 studio monitors to enrich your full range mix.


    - Powered studio monitor subwoofer designed for high output and superior low-frequency performance
    - Powerful, deep extended bass for your Mackie MRmk3 studio
    - 120 watts of Class A/B amplification
    - 10" glass aramid composite woofer
    - Shelf-ported for satisfying, deep low end
    - Stereo XLR and TRS connection offer input flexibility
    - Stereo balanced TRS outputs for connection to mains
    - Adjustable 40 to 180 Hz crossover point
    - Polarity switch (0 degrees / 180 degrees)
    - Rugged all-wood cabinet design built to last
    - Vibration-absorbing rubber feet minimize undesirable resonances
    - Low-profile, soft-mesh grille cloth delivers a sleek studio look
    - Allows your mains to focus on highs/mids for optimum studio performance

    Same Day Music is an authorized dealer of Mackie products.

    Mackie MR10Smk3 Powered Studio Subwoofer Technical Description

    Input: XLR, 1/4" TRS
    Output: 1/4" TRS

    Acoustic Performance:
    Free Field Frequency Response: 35 Hz - 180 Hz
    Sound Pressure Level @ 1 meter, +4 dBu into Balanced Input: 113 dB SPL @ 1 meter
    Maximum SPL Per Pair: 119 db SPL @ 1 meter

    Low Frequency: 10" (254 mm) hyperbolic curved cone woofer

    Low Frequency Power: 120 watts, 4 ohm load, 240 watts peak
    Type: Monolithic IC, Class AB with DMOS power stage

    Electronic Crossover:
    Crossover Type: 12 dB/octave
    Crossover Frequency: 40 Hz - 180 Hz [Adjustable]
    Sensitivity: +4 dBu at 65 Hz for full output
    Input Impedance: 20 kOhms, balanced bridging; 10 kOhms unbalanced

    AC Power Requirements:
    US: 120 VAC, 60 Hz
    Europe: 240 VAC, 50 Hz
    Korea: 220 VAC, 60 Hz
    Japan: 100 VAC, 50/60 Hz
    Note: MR10Smk3 subwoofers do not support multiple voltage configurations. Make sure the voltage rating for your particular model (as indicated on the rear panel near the IEC socket) corresponds with your local AC mains voltage.
    AC Connector: 3-pin IEC 250 VAC, 16 A male
    Fuse: 115 VAC: T 2.5 AL / 250 V 230 VAC: T 1.25 mAL / 250 V
    Power Consumption: 250 watts with music, loud mix; 13 watts quiescent (idle)

    Physical Dimensions and Weight:
    Enclosure: 0.625 in / 15 mm thick MDF with 0.98 in / 25 mm MDF front panel
    Damping: Adiabatic batting
    Height: 15 in / 381 mm
    Width: 12.6 in / 320 mm
    Depth: 15 in / 381 mm
    Weight: 27.3 lb / 12.4 kg

    Same Day Music is an authorized dealer of Mackie products.

    User Reviews for Mackie MR10Smk3 Powered Studio Subwoofer

    Recently Viewed:
    Your Interests:
    See Products That Ship to You
    Viewing products that ship to United States

    Copyright ©2017. This site is protected by copyright. There are terms for its use. Send us Feedback on our site and your experiences. Our descriptions, pictures, and prices are mostly accurate, but cannot be guaranteed. Cookies should be enabled in your web browser for full site functionality (details).