Marshall 2266C Vintage Modern Guitar Combo Amplifier (50 Watts, 2x12 in.)
KT66 power tubes. "Frequency selective" pre-amp volumes.
60-Day Return Policy Applies on This Item - Get it shipped today and if it isn't perfect, send it back!
We DO NOT COLLECT TAX except on orders shipped to New Jersey.
RECOMMENDED ACCESSORIES:
- Ernie Ball Regular Slinky Strings
- from $3.90
ADDITIONAL VIEWS:
Main
Right Angle
Left Angle
FIND SIMILAR PRODUCTS:
PRODUCT DESCRIPTION
The 2266C 50-watt 2X12 combo is an all-valve single channel amplifier with a choice of 2 "dynamic ranges" selectable by a footswitch. The Low range equates to the performance you would come to expect from a stock vintage Marshall amplifier in terms of tone and available gain. The High range adds an extra preamp valve into the signal path, facilitating those classic hard rock tones of the 70s. Add to this, the ability to dynamically interface with your instrument's volume and tone controls and the experience translates into a truly expressive and organic feel in performance.
Two "frequency selective" pre-amp volumes (gains) -- Body and Detail -- facilitate greater flexibility of tonal shaping for individual guitars and styles while the power amplifier is heavily based on the first Marshall amplifiers to be produced, with 4 x KT66 output valves yielding that substantial fat and smooth tone. A Mid Boost switch on the front panel fattens the tone even more while a traditional Marshall tone control circuit enables fine tuning of your sound.
Vintage and Modern
These are 2 words that don't normally sit comfortably together unless you're talking guitar amplification. The Vintage aspect of course, the tone-fat, smooth, classic and dynamic. The Modern aspect is the feature-set included to enable ease of use and flexibility -- master volume, series FX loop, extra overdrive for those hot "modded" sounds, onboard reverb and a new frequency selective pre-amp topology to facilitate tonal tailoring for specific instruments and musical styles.
Two "frequency selective" pre-amp volumes (gains) -- Body and Detail -- facilitate greater flexibility of tonal shaping for individual guitars and styles while the power amplifier is heavily based on the first Marshall amplifiers to be produced, with 4 x KT66 output valves yielding that substantial fat and smooth tone. A Mid Boost switch on the front panel fattens the tone even more while a traditional Marshall tone control circuit enables fine tuning of your sound.
Vintage and Modern
These are 2 words that don't normally sit comfortably together unless you're talking guitar amplification. The Vintage aspect of course, the tone-fat, smooth, classic and dynamic. The Modern aspect is the feature-set included to enable ease of use and flexibility -- master volume, series FX loop, extra overdrive for those hot "modded" sounds, onboard reverb and a new frequency selective pre-amp topology to facilitate tonal tailoring for specific instruments and musical styles.
TECHNICAL DESCRIPTION
Head: No
Combo: Yes
Output (RMS): 50 watts
Speakers: 2 x G12C
Pre-amp Valves: 4 x ECC83
Power Amp Valves: 2 x KT66
Footswitch (Supplied): PEDL-00041
Dimensions (mm): 690 x 5700 x 270
Weight (kg): 30
Combo: Yes
Output (RMS): 50 watts
Speakers: 2 x G12C
Pre-amp Valves: 4 x ECC83
Power Amp Valves: 2 x KT66
Footswitch (Supplied): PEDL-00041
Dimensions (mm): 690 x 5700 x 270
Weight (kg): 30
REVIEWS
