Marshall 2466 Vintage Modern Guitar Amplifier Head (100 Watts)
KT66 power tubes. "Frequency selective" pre-amp volumes. Low and High "dynamic ranges."
- LIMITED TIME OFFER
- Receive a FREE Marshall MTB Head Bag with purchase of new select Marshall Guitar Amp Heads from 06/01/08 & 09/31/08. See PDF Rebate Offer for full details.
60-Day Return Policy Applies on This Item - Get it shipped today and if it isn't perfect, send it back!
We DO NOT COLLECT TAX except on orders shipped to New Jersey.
ADDITIONAL VIEWS:
Main
Chassis Left
Chassis Front
Rear
Chassis Under
FIND SIMILAR PRODUCTS:
PRODUCT DESCRIPTION
The 2466 100-watt head is an all-valve, single-channel amplifier with a choice of 2 "dynamic ranges" selectable by footswitch. The Low range equates to the performance you would come to expect from a stock vintage Marshall amplifier in terms of tone and available gain. The High range adds an extra preamp valve into the signal path, facilitating those classic hard rock tones of the 70s. Add to this, the ability to dynamically interface with your instrument's Volume and Tone controls and the experience translates into a truly expressive and organic feel in performance.
Two "frequency selective" pre-amp volumes (gains) -- Body and Detail -- facilitate greater flexibility of tonal shaping for individual guitars and styles while the power amplifier is heavily based on the first Marshall amplifiers to be produced, with 4 x KT66 output valves yielding that substantial fat and smooth tone. A Mid Boost switch on the front panel fattens the tone even more while a traditional Marshall tone control circuit enables fine tuning of your sound.
Vintage and Modern
These are 2 words that don't normally sit comfortably together unless you're talking guitar amplification. The Vintage aspect of course, the tone-fat, smooth, classic and dynamic. The Modern aspect is the feature-set included to enable ease of use and flexibility -- master volume, series FX loop, extra overdrive for those hot "modded" sounds, onboard reverb and a new frequency selective pre-amp topology to facilitate tonal tailoring for specific instruments and musical styles.
Two "frequency selective" pre-amp volumes (gains) -- Body and Detail -- facilitate greater flexibility of tonal shaping for individual guitars and styles while the power amplifier is heavily based on the first Marshall amplifiers to be produced, with 4 x KT66 output valves yielding that substantial fat and smooth tone. A Mid Boost switch on the front panel fattens the tone even more while a traditional Marshall tone control circuit enables fine tuning of your sound.
Vintage and Modern
These are 2 words that don't normally sit comfortably together unless you're talking guitar amplification. The Vintage aspect of course, the tone-fat, smooth, classic and dynamic. The Modern aspect is the feature-set included to enable ease of use and flexibility -- master volume, series FX loop, extra overdrive for those hot "modded" sounds, onboard reverb and a new frequency selective pre-amp topology to facilitate tonal tailoring for specific instruments and musical styles.
TECHNICAL DESCRIPTION
Head: Yes
Combo: No
Output (RMS): 100 watts
Speakers: No
Pre-amp Valves: 4 x ECC83
Power Amp Valves: 4 x KT66
Footswitch (Supplied): PEDL-00041
Dimensions (mm): 750 x 310 x 230
Weight (kg): 22.5
Combo: No
Output (RMS): 100 watts
Speakers: No
Pre-amp Valves: 4 x ECC83
Power Amp Valves: 4 x KT66
Footswitch (Supplied): PEDL-00041
Dimensions (mm): 750 x 310 x 230
Weight (kg): 22.5
REVIEWS
