FIND SIMILAR PRODUCTS
60-Day Return Policy Applies on This Item - Get it shipped today and if it isn't perfect, send it back!
Payment Options We DO NOT COLLECT TAX except on orders shipped to New Jersey.
RECOMMENDED ACCESSORIES
The Marshall Vintage Modern half stack features the best of both worlds.
These are two words that don't normally sit comfortably together unless you're talking guitar amplification. The Vintage aspect of course, the tone-fat, smooth, classic and dynamic. The Modern aspect is the feature-set included to enable ease of use and flexibility- Master Volume, series FX Loop, Extra overdrive for those hot modded sounds, onboard Reverb and a New frequency selective pre-amp topology to facilitate tonal tailoring for specific instruments and musical styles.
The Marshall 2466 Vintage Modern head is an all-valve single channel amplifier with a choice of two dynamic ranges selectable by a footswitch. The Low range equates to the performance you would come to expeect from a stock vintage Marshall amplifier in terms of tone and available gain. The High range adds an extra preamp valve into the signal path, facilitating those classic hard rock tones of the seventies. Add to this, the ability to dynamically interface with your instrument's Volume and Tone controls and the experience translates into a truly expressive and organic feel in performance.
Two frequency selective Pre-amp volumes (gains)-Body and Detail- facilitate greater flexibility of tonal shaping for individual guitars and styles while the power amplifier is heavily based on the first Marshall amplifiers to be produced, with four KT66 output valves yielding that substantial fat and smooth tone. A Mid Boost switch on the front panel fattens the tone even more while a traditional Marshall tone control circuit enables fine tuning of your sound.
Marshall follows tradition with the Vintage Modern 425A angled cabinet. A 4x12 cabinet, the 425A is mono/stereo switchable and loaded with G12C 25 Watt Celestion Greenbacks. These were specifically developed for the Limited Edition Jimi Hendrix Super100JH stack and are voiced to give that rich and balanced harmonic timbre. The perfect marriage of vintage sound and modern features from Marshall.
Marshall 2466 Guitar Amp Head
Output (RMS): 100 Watts
Pre-amp Valves: 4 x ECC83
Power Amp Valves: 4 x KT66
Footswitch (supplied): PEDL-00041
Dimensions (mm): 750 x 310 x 230
Dimensions (in.): 29.53 x 12.20 x 9.06
Weight (Kg): 22.5
Weight (Lbs): 49.6
Marshall 425A Guitar Speaker Cabinet
Speaker Type: Celestion G12C (25 Watt)
Speaker Configuration: 4 x 12 in.
Power (RMS): 100 Watt
Impedance: Mono: 16 Ohms/4 Ohms
Stereo: 8 Ohms/8 Ohms
Dimensions (mm): 770 x 755 x 365
Dimensions (in.): 30.31 x 29.72 x 14.37
Weight (Kg): 36
Weight (Lbs): 79.37
Copyright ©2009. This site is protected by copyright. There are terms for its use. Send us Feedback on our site and your experiences. Our descriptions, pictures, and prices are mostly accurate, but cannot be guaranteed. Cookies should be enabled in your web browser for full site functionality (details).
