Toll Free 866-SHIP-SDM (866-744-7736) Mention service code 1441-9FH4 Hours

    QSC AP-5122M AcousticPerformance Floor Monitor Speaker, 2-Way (550 Watts, 1x12")

    This product has been discontinued or is no longer sold by SameDayMusic.

    Shop our website for related products:

    (In most cases, a product is unavailable because it has been discontinued by its manufacturer.)

    QSC AP-5122M AcousticPerformance Floor Monitor Speaker, 2-Way (550 Watts, 1x12") Product Description

    The QSC AP-5122m AcousticPerformance Stage Monitor is a two-way, full-range loudspeaker featuring a 12-inch woofer and is ideal for a variety of portable and installed sound reinforcement applications and can be used as a floor wedge or a main speaker. The AP-5122m uses a high power-capacity 3-inch diaphragm compression driver and combines it with a 12-inch woofer to deliver exceptional full bandwidth reproduction and high SPL. A 40 degree monitor angle, M10 fittings, speaker pole cup and yoke mount fittings allow the QSC AP-5122m to be used in virtually any set-up.

    Enclosure and terminal input cup designed facilitate the cable runs for clean stage dressings.

    Clean industrial design with unadorned grilles compliment most decors and settings.

    Complete EASE, CAD and BIM information available at qsc.com
    DMT (Directivity Matched Transition) gives the AP-5122m loudspeaker a uniform power-response by matching LF and HF coverage in the cross-over region. Another key to the extraordinary accuracy and flat power response of the AP-5122m is the axisymetric waveguide with uncompromised performance in both the vertical and horizontal axes. The result is remarkably consistent coverage and smooth, accurate reproduction on and off-axis.

    The AP-5122m may be used as a passive (full-range) loudspeaker or monitor to minimize amplifier channel count or it may be bi-amplified for greater control and performance. To further enhance performance, bi-amp and full-range tunings using QSC Intrinsic Correction techniques are available for Q-Sys and future QSC products.

    The QSC AP-5122m AcousticPerformance speaker features a 40 degree angle making it ideal for floor monitor use and a pole cup for deployment on a loudspeaker stand. The enclosure and terminal input cup on the AP-5122m have been designed facilitate the cable runs for a clean appearance on stage. The speaker also incorporates M10 mounting points for suspension via eye-bolts as well as mount points for an optional yoke bracket.

    Presenting a clean, unobtrusive look, AcousticPerformance grills are unadorned eliminating the need to cover-up logo treatments which can be difficult to hide or remove. The grill is also lined with acoustically transparent backing adding to the enclosure's professional appearance.

    Features:

    - DMT (Directivity Matched Transition) ensures smooth, coherent power response across the listening plane
    - 90 degree coverage of the axisymmetric waveguide matches natural coverage of the 12-inch woofer at the crossover point for consistent power response
    - 3-inch voice coil compression driver for outstanding high-frequency performance
    - 40 degree monitor deployment angle ideal for floor monitor use
    - M10 fittings, pole cup for speaker stand, and yoke mount fittings offer flexible deployment options for a variety of applications
    - Dual NL4 Speakon connector
    - Bi-Amp / Passive switchable
    - 15-ply Baltic birch plywood construction
    - 16-Gauge powder coated steel grilles

    Same Day Music is an authorized dealer of QSC products.

    QSC AP-5122M AcousticPerformance Floor Monitor Speaker Technical Description

    - Frequency Response (-10dB): 55Hz - 18kHz
    - Power Capacity: 550W continuous
    - System Sensitivity: 95dB, 1W at 1m
    - Coverage Angle: 90 degrees Axisymmetric
    - Directivity Factor (Q): 6.0
    - Directivity Index (DI): 7.8
    - Recommended Crossover: 950 Hz, 48dB/octave
    - Maximum Rated SPL: Passive: 122dB at 1m continuous; 128dB at 1m peak
    - Rated Impedance: 8 ohms
    - HF Transducer: 3-inch voice coil compression driver; 72W
    - LF Transducer: 12-inch driver with 4-inch VC; 550W
    - Optional Accessories: AP-YM12m Yoke mount, M10 Kit-W
    - Input Connector: Dual NL4 connector
    - Enclosure Material: 15-ply Baltic birch plywood
    - Attachment Points: 11x M10 threaded inserts
    - Grill: 16 Gauge powder coated steel
    - Dimensions (HxWxD): 26 x 15 x 11.3-inches
    - Weight: 63 lbs

    Same Day Music is an authorized dealer of QSC products.

    User Reviews for QSC AP-5122M AcousticPerformance Floor Monitor Speaker, 2-Way (550 Watts, 1x12")

    Recently Viewed:
    Your Interests:
    See Products That Ship to You
    Viewing products that ship to United States
     

    Copyright ©2014. This site is protected by copyright. There are terms for its use. Send us Feedback on our site and your experiences. Our descriptions, pictures, and prices are mostly accurate, but cannot be guaranteed. Cookies should be enabled in your web browser for full site functionality (details).

    Get the best deals at the speed of sound!
    PLUS exclusive discounts and news straight to your inbox.

    Totally FREE - just provide your email address.
    (The only risk in joining is saving too much!)

    I'd like Sonic Savings via postal service, too.
    We will not sell your email address. You can opt out at any time. No thanks, take me to Same Day Music.