QSC HPR122i Powered 2-Way Speaker (1x12 in.)
For use as main PA or monitor. High continuous power. Irregular finish. Cabinet gloss does not match normal production units.
Product rated 10.0 out of 10 (1 rating)
- LIMITED TIME OFFER
- Register new product online with QSC and receive a Free 6-Year Extended Warranty upgrade ( a $99 value)
60-Day Return Policy Applies on This Item - Get it shipped today and if it isn't perfect, send it back!
We DO NOT COLLECT TAX except on orders shipped to New Jersey.
RECOMMENDED ACCESSORIES:
- Whirlwind MC20 Mic Cable
- from $10
ADDITIONAL VIEWS:
Main
Irregular Finish Details 1
As Floor Monitor
Angle
Shackle Mounted
Rear
Stand Mounted
Mounted Atop Sub
Irregular Finish Details 2
MORE RESOURCES:
FIND SIMILAR PRODUCTS:
PRODUCT DESCRIPTION
The HPR122i offers performers and audio professionals the power, technology and legendary reliability of QSC amplification combined with the simplicity and convenience of a multipurpose powered loudspeaker system. Whether your application is vocal reinforcement, dance music, or full tilt rock and roll and whether your need is main PA, or stage monitor, suspended or pole mounted, the HPR122i is your solution. With 131 dB of maximum output the HPR122i outperforms molded plastic box systems without significant additional weight or cost.
A 12 in. low-frequency woofer with 3 in. voice coil is powered by 400 watts of class H power. A neodymium magnet design provides ample motor strength for low end performance without adding unnecessary weight. The 1.4 in. diaphragm neodymium compression driver is powered by a 100 watt, class AB+B amplifier and is loaded on a 75 degrees conical horn. It's the same high-frequency driver you'll find on the HPR153F 3-way loudspeaker system.
Features:
Ideally suited for use as main PA or monitor
High continuous power: 500 watts total amplifier power
75 degrees conical horn provides predictable coverage regardless of cabinet orientation
Nine (9) M10 suspension points allow for multiple suspended applications
SPECIAL - Irregular Shiny Stock
SPECIAL - Irregular Shiny Stock
During a recent production run, a batch of HPR speakers were coated with non-standard "shiny" paint. As a result, their finish is a bit more reflective than QSC's typical flat-black enclosures.
As you'll see in the above "irregular finish" images, the difference is barely noticeable. Still, QSC's commitment to quality keeps them from offering these as "new". The pristine sound quality remains the same, so this is your chance to save some money!
Just choose the "Blemished, Shiny Irregular Finish" option and you'll get the reduced price. These speakers are fully covered by QSC's standard 3-year warranty, with the same free upgrade to the 6-year warranty when you register them online at QSC's website. Order today and save!
A 12 in. low-frequency woofer with 3 in. voice coil is powered by 400 watts of class H power. A neodymium magnet design provides ample motor strength for low end performance without adding unnecessary weight. The 1.4 in. diaphragm neodymium compression driver is powered by a 100 watt, class AB+B amplifier and is loaded on a 75 degrees conical horn. It's the same high-frequency driver you'll find on the HPR153F 3-way loudspeaker system.
Features:
Ideally suited for use as main PA or monitor
High continuous power: 500 watts total amplifier power
75 degrees conical horn provides predictable coverage regardless of cabinet orientation
Nine (9) M10 suspension points allow for multiple suspended applications
SPECIAL - Irregular Shiny Stock
SPECIAL - Irregular Shiny Stock
During a recent production run, a batch of HPR speakers were coated with non-standard "shiny" paint. As a result, their finish is a bit more reflective than QSC's typical flat-black enclosures.
As you'll see in the above "irregular finish" images, the difference is barely noticeable. Still, QSC's commitment to quality keeps them from offering these as "new". The pristine sound quality remains the same, so this is your chance to save some money!
Just choose the "Blemished, Shiny Irregular Finish" option and you'll get the reduced price. These speakers are fully covered by QSC's standard 3-year warranty, with the same free upgrade to the 6-year warranty when you register them online at QSC's website. Order today and save!
TECHNICAL DESCRIPTION
Configuration: 12 in. 2-way multipurpose powered loudspeaker
Transducers
Low Frequency: 12 in. neodymium transducer with 3 in. voice coil
High Frequency: 1.4 in. diaphragm compression driver
Frequency Response (-3 dB)*: 62 Hz - 18 kHz
Frequency Range (-10 dB)*: 53 Hz - 22 kHz
Nominal coverage (-6 dB): 75 degrees conical
Maximum SPL (1 meter): 131 dB peak
Power Output: 400W LF Class H, 100W HF Class AB+B
Input Impedance: 22k balanced, 11k unbalanced
Controls: Gain, Low-cut filter (Main / Monitor), Front LED On/Off, Power, Circuit breaker
Indicators: Power, Signal, Limit
Cooling: Convection
Amplifier Protection: Thermal and output power limiting, output short circuit, overtemperature muting, driver DC protection
Current Consumption at 120 VAC (1/8 power EIA noise): 1.5A
Enclosure: Painted Birch plywood
Finish: Black textured paint
Grille: Powder coated 16 gauge steel
Suspension/Attachment Points: 9 M10 rigging locations
Connectors:
Balanced female XLR line level input
Balanced male XLR full range line level out
Dimensions: 26.9 in. H x 14.7 in. W x 14.9 in. D (683 mm x 373 mm x 379 mm)
Net Weight: 60 lbs / 27.2 kg
Optional Accessories:
HPR COVER 122
HPR POLE 31
HPR YOKE 122
HPR M10 KIT
HPR SUS KIT 122
*Measured in half-space.
Specifications subject to change without notice.
Transducers
Low Frequency: 12 in. neodymium transducer with 3 in. voice coil
High Frequency: 1.4 in. diaphragm compression driver
Frequency Response (-3 dB)*: 62 Hz - 18 kHz
Frequency Range (-10 dB)*: 53 Hz - 22 kHz
Nominal coverage (-6 dB): 75 degrees conical
Maximum SPL (1 meter): 131 dB peak
Power Output: 400W LF Class H, 100W HF Class AB+B
Input Impedance: 22k balanced, 11k unbalanced
Controls: Gain, Low-cut filter (Main / Monitor), Front LED On/Off, Power, Circuit breaker
Indicators: Power, Signal, Limit
Cooling: Convection
Amplifier Protection: Thermal and output power limiting, output short circuit, overtemperature muting, driver DC protection
Current Consumption at 120 VAC (1/8 power EIA noise): 1.5A
Enclosure: Painted Birch plywood
Finish: Black textured paint
Grille: Powder coated 16 gauge steel
Suspension/Attachment Points: 9 M10 rigging locations
Connectors:
Balanced female XLR line level input
Balanced male XLR full range line level out
Dimensions: 26.9 in. H x 14.7 in. W x 14.9 in. D (683 mm x 373 mm x 379 mm)
Net Weight: 60 lbs / 27.2 kg
Optional Accessories:
HPR COVER 122
HPR POLE 31
HPR YOKE 122
HPR M10 KIT
HPR SUS KIT 122
*Measured in half-space.
Specifications subject to change without notice.
REVIEWS
Product rated 10.0 out of 10 (1 rating)
