MORE RESOURCES
FIND SIMILAR PRODUCTS
Because this item is used at your mouth or ear, it cannot be returned once opened due to health reasons.
Payment Options Buying for a school, government organization, or house of worship? Pay by invoice! Details We DO NOT COLLECT TAX except on orders shipped to New Jersey.
RECOMMENDED ACCESSORIES
It is hard to believe that such small, unobtrusive microphones can produce such great sound, but it's true. Available in black or white finishes, and with in line or plate mount preamps, MX202 Microflex Overhead condenser microphones capture high-quality sound in a compact, adjustable package. This model features a cardioid microphone cartridge attached to a flexible, four inch gooseneck with a 30 foot cable. The preamp options available offer easy installation in ceilings or microphone stands, and when combined with the high sensitivity cartridge's wide frequency response, these microphones provide accurate sound reproduction with a minimum of RF interference or electromagnetic hum.
Features
Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
Interchangeable cartridges that provide an optimal polar pattern choice for each application
Balanced, transformerless output for increased immunity to noise over long cable runs
Supplied stand-mount adapter for portable applications (in-line preamplifier versions only)
White or black finish that blends unobtrusively with most surroundings
Output Impedance: 180 ohms actual (EIA rated at 150 ohms)
Sensitivity (At 1,000 Hz, open circuit voltage*)
- Cardioid: -35.0 dBV/Pa (17.8 mV)
All values -12 dB at 0 gain; *1 Pascal = 94 dB SPL
Maximum SPL (1 kHz at 1% THD, 1 k ohm load)
- Cardioid: 124.2 dB
All values +6 dB at 0 gain
Equivalent Output Noise (A-weighted)
- Cardioid: 28.0 dB SPL
Signal to Noise Ratio (referenced at 94 dB SPL)
- Cardioid: 66.0 dB
Dynamic Range at 1 k ohm load
- 96.2 dB
- 100 dB at 0 gain
Common Mode Rejection: 45.0 dB minimum
Preamplifier Output Clipping Level (1% THD): -6.0 dBV (0.5 V), -12 dBV at 0 gain
Polarity: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector.
Power Requirements: 11 to 52 Vdc phantom, 2.0 mA
Environmental Requirements:
- Operating Temperature Range: -18 to 57 degrees C (0 to 135 degrees F)
- Relative Humidity: 0 to 95%
1 user has rated this product, but no one has reviewed it yet. To rate this item and/or write a review, click the "Rate It" button.
Copyright ©2009. This site is protected by copyright. There are terms for its use. Send us Feedback on our site and your experiences. Our descriptions, pictures, and prices are mostly accurate, but cannot be guaranteed. Cookies should be enabled in your web browser for full site functionality (details).