Item added to the cart! ×
Skip to content

Tascam DR-10X Plug-On Linear PCM Digital Recorder

We're sorry, but this item is unavailable.
FREE -Day Shipping: Get it by
Order within
Get it  if you order in
Expedited shipping cost:
×
Get It Sooner
Only Left!
New Product!
Pre-order yours today and you wont get charged until it ships.
On Backorder
Call to order!
Brand: Tascam

TASCAM's compact DR-10X attaches to a handheld microphone for the ultimate compact news gathering recording system. A captive XLR connector attaches firmly to your microphone, capturing interviews at 48kHz/24-bit Broadcast WAV resolution. Offload recordings through the microUSB connection or by removing the microSD card.The DR-10X has both manual and automatic gain settings, with a low cut filter and limiter to prevent overloads. The Dual Recording mode captures a copy of the audio at a lower level, so if there is distortion you have a backup safety. Recording can begin instantly by holding the record side switch while turning the unit on.For simple-to-use ENG recording that stays out of the way, TASCAM's DR-10X leads the field. This recorder can be attached to a dynamic mic or a battery-powered condenser mic and record its output This audio recorder is designed for plug-on connection, so it can be connected directly to XLR handheld mics. In addition to dynamic mics, it can also be used with battery-powered condenser mics. In addition to using this recorder with handheld mics in interviews and mics on stands in press conferences, it can also be used for recording seminars, meetings and any other situations using a handheld microphone.

Compact and lightweight

The DR-10X is compact
- fitting in the palm of the hand and lightweight at 56.3 grams. In addition, the mic connector has a locking mechanism that ensures a tight fit to the microphone body giving the entire assembly a solid feel.When recording interviews or reporting that requires high audio quality, a field recorder is normally needed. But for small-scale reporting, you can record high-quality audio with just a microphone and the DR-10X. No need to carry bulky equipment
- you can now record with a compact rig that you can hold in one hand.

Sliding Record Button and Hold Function to Prevent Misoperation During Recording

The recording switch uses a sliding mechanism. This prevents misoperation from accidentally pressing a button. In addition, the hold function can prevent recording from being stopped by accidental contact with a button. Since the DR-10X is designed to be used together with a mic as a single unit, it is engineered to prevent misoperation during recording.

Multiple Functions, Including Dual-Recording for Simultaneously Creating A Safety Track At A Lower Level

Many times, there is only one chance to get the desired audio. This unit has functions to prevent issues related to recording level settings
- including a dual recording function that allows you to set the recording level as high as possible while simultaneously recording a backup track at a lower level. In addition, this unit has an automatic gain control function that adjusts the input level to match the input volume.

There Is Also A Limiter Function

Before the battery charge runs out, automatic file closing prevents the loss of already recorded data. You can check the battery level on the easy-to-read organic EL display. Even if the battery should run out unexpectedly, the unit will automatically close the file to prevent the loss of already recorded data before it shuts down.

Built-In Clock Function and Support For BWF Files (Time Information Stored In Metadata)

This unit has a built-in clock and supports BWF audio files that can have time information added to them. This feature is helpful for searching and editing recorded audio files.

Playback Function Allows Recordings To Be Checked And Headphones Output Enables Input Monitoring

Even though this unit is compact, it can play back recorded files. You can also connect headphones to check recorded data right away and to monitor the input during recording.

Features:


- XLR plug-on connection
- Compatible with dynamic mics as well as battery-powered condenser mics
- 48kHz/24-bit linear PCM mono recording
- WAV files (compatible with BWF format)
- Media: microSD/SDHC cards (supports 32GB capacities)
- Sliding record switch and hold function to prevent misoperation during recording
- Dual recording function
- Automatic file closing function to prevent the loss of already recorded data
- XLR connector also can use as external input for external input
- High/Mid/Low recording level settings
- Low-cut filter
- Limiter
- Automatic level function
- With a built-in clock function, supports BWF files that can have time information added, which is convenient for editing and searching
- Time track incrementing function can create new files at regular intervals (every 15 minutes) during recording
- Playback function allows recorded data to be checked immediately
- Headphone output
- Locking mechanism assure a tight connection with the microphone body
- Easy-to-read organic EL display
- micro USB B port enables easy data exchange with computers
- Records at least 10 hours on a single AAA battery by using alkaline batteries (EVOLTA)
- Unit settings can be created and transferred as a computer text file
- Settings can be transferred between multiple DR-10X units using the infrared transmission function
- Firmware can be updated using a microSD card
- RoHS-compliant product

New Products
Brand-new products are shipped from the vendor's factory to our warehouses, then from the warehouse to you – there's no detour through a retail store where the boxes are opened, and the products put on display and sold as leftovers. When you shop online, make sure you're comparing new, factory-fresh gear from authorized US dealers like zZounds.

Clearance Gear: Special Opportunities to Save Big!
When It's Not New, We Tell You
We occasionally have opportunities to buy B-stock merchandise from manufacturers. And sometimes, we get customer returns in less than perfect condition. We offer these products to you at special discounts – and we always identify it clearly using the classifications below. So unless it says otherwise, your product is new from the factory.

Warehouse Resealed
Warehouse Resealed gear is typically a customer return. This inventory includes all parts, components, manuals (hard copy or downloadable) and the full factory warranty*. However, the packaging may be slightly compromised and thus not in absolutely perfect, unused condition like our new inventory. This inventory is a great value.

Blemished
This is typically a customer return with minor cosmetic imperfections, such as superficial scratches or scuffs on the finish. This inventory includes all parts, components, manuals (hard copy or downloadable) and the full factory warranty*. It has been tested to manufacturer's specifications and is guaranteed to work perfectly. It may be less attractive than Warehouse Resealed inventory, but it's priced even lower! This inventory is a great value.

Scratch and Dent
This is typically a customer return that shows general wear and tear, along with dents and scratches. This inventory includes all parts, components, manuals (hard copy or downloadable) and the full factory warranty*. It has been tested to manufacturer's specifications and is guaranteed to work perfectly, but will show signs of use. It may be less attractive than Blemished inventory, but it's priced even lower! This inventory is a great value.

Factory Resealed
Factory Resealed gear is typically a purchase directly from the vendor, who may have used the product at a training session or at a trade show. It may also be a factory-refurbished product. This inventory includes all parts, components, manuals (hard copy or downloadable) and the full factory warranty*. However, the packaging may be slightly compromised and thus not in absolutely perfect, unused condition like our new inventory. This inventory is a great value.

B-Stock
B-Stock gear is typically a purchase directly from the vendor, who may have used the product at a training session or at a trade show, or it may be a refurbished product. This inventory includes all parts, components, manuals (hard copy or downloadable) and the full factory warranty*. It has been tested to manufacturer's specifications and it is guaranteed to work perfectly, but it may have a cosmetic blemish. It may be less attractive than Warehouse or Factory Resealed inventory, but it's priced even lower! This inventory is a great value.

* Warranty coverage for non-new gear varies by manufacturer. Contact Us to see if this item includes a warranty.

At Same Day Music, we know you want your gear fast, and shipped to you free of charge. That’s why we ship orders 7 days a week, with absolutely free ground shipping on every order shipped within the continental United States. This includes heavy and oversized items. No minimum purchase required. No exclusions. Over 95% of orders arrive in 1-2 days! We pull it all off with our four warehouses located across the country, which we keep open late.

Learn more

We guarantee your complete satisfaction for 30 days after your order is delivered.

We allow you to return almost any product for any reason. When returning a product, you can request an identical replacement item, exchange the product for another product, or request a refund. When procedures are followed, there are no restocking fees. For Canadian and U.S. territories customers, please note that if you request an exchange, we require the original item to be received and processed in our warehouse before shipping a replacement.

Learn more