The DR-70D from TASCAM is the ultimate audio recording solution for filmmakers. Four balanced XLR mic inputs meet the requirements of production sound, from professional users to indie DSLR shooters. The compact format can be mounted either above or below a camera, and a pair of built-in microphones can capture sound on-set. The interface is designed for quick adjustment, with additional features to keep recording levels under control.Four XLR mic inputs with phantom power are included on the DR-70D, enough to cover busy scenes. The High-Quality HDDA(High Definition Discrete Architecture) Mic Preamps include 64dB of gain for quiet performances, and all four inputs have individual gain controls. Each input has a limiter and low cut filter available for controlling volume. Also included is Dual Recording mode, which records a safety copy of your audio at a lower level to prevent distorted takes. Quality components like 5532 op amps are used throughout for the clearest audio possible.Tracks on the DR-70D are captured to SD card, SDHC or SDXC media - up to 128GB cards are supported. The recorder has tripod mounts on the top and bottom of the unit, allowing it to be mounted on a camera, a follow-focus cage, or used standalone. Other production friendly features include a slate tone, low-noise buttons, a powerful headphone output, and standard AA battery power. Uniquely designed for the needs of filmmakers, television producers, advertisers, and documentarians, the DR-70D packs multitrack recording into a package compact enough to use with any camera.
Two built-in omni-directional mics
Two omni-directional microphones allow easy recording of natural stereo sound without using external mics. Used in combination with one or two other mics, the DR-70D becomes a compact setup for recording interviews and ambient sound at the same time.
4 XLR/TRS combo jacks allow a variety of setups
(4) XLR/TRS inputs are built-into the DR-70D. The four-channel design enables combinations of shotgun microphones, lavaliere mics, and the built-in stereo mic to be recorded individually. Channels 1 and 2 can be set to stereo input and channels 3 and 4 can be set to the built-in mics, making a variety of mic configurations possible.Dual Recording mode can be used to create a backup file that is simultaneously recorded at a different level to prevent clipping when levels exceed the maximum input. The second track is recorded up to 12dB lower as a safety track to prevent distortion - if your input signal overloads, you have a backup that isn't distorted.
Built-in 4-in/2-out Mixer Enables 4-channel and Stereo Recording
Each of the four inputs is sent to a stereo mixer. This allows each input to be recorded individually for post production while a stereo mix is sent to headphones and the camera guide track. In addition to pan and level parameters, each input includes a limiter, a low-cut filter, and a delay to adjust for distances between mics. In addition, a mid-side decoding function enables the use of a MS stereo mics.
HDDA (High Definition Discrete Architecture) mic preamps
Microphone preamps do a lot of work to convert your mic-level signals to recordable levels, so they have a big impact on the quality of the audio that is recorded. The DR-70D uses TASCAM HDDA microphone preamps - created through careful selection of parts. An NE5532 op-amp was selected for its outstanding effect on audio quality. Through a mix of discrete architecture and hand-picked components, TASCAM has achieved an equivalent input noise level of -120 dBu.
- Supports SD/SDHC/SDXC cards - Maximum number of tracks recorded simultaneously: (4) - Recording modes: MONO, STEREO, 2MIX, DUAL MONO, DUAL ST, DUAL 2MIX - Recording formats: 16/24-bit, 44.1k/48k/96k Hz (WAV/BWF) - TASCAM HDDA microphone preamps provide legendary audio performance - Input levels can be adjusted independently - XLR/TRS inputs support +4dBu line level and phantom power (24V/48V) - Supports mics requiring plug-in power, and mics with high output (1-2) - CAMERA OUT jack enables audio mixed on the DR-70D to be output to the camera - CAMERA IN jack allows the DSLR camera audio to be monitored through the DR-70D - High-quality audio output through the line output jack that is independent of the headphones jack - Headphone jack with 20mW+20mW maximum output - Tripod mounting threads (bottom), camera screw attachment and a shoe mount that can be attached and removed with a coin (top) - Handles on the front left and right sides protect the screen and can be used to attach a shoulder strap - Transport and SLATE buttons are made of rubber to prevent handling noise during use - HOLD switch prevents accidental operation - 128x64-pixel graphic LCD with backlight - High-speed transfer of files to a computer using USB 2.0 - Micro-B USB cable included - Built-in mixer can be used to adjust Pan and Level to mix output of (4) channels - Low-cut filter with five settings (40/80/120/180/220 Hz) to be used to reduce unwanted air-conditioning noise and other low-frequency sounds - Limiter function can automatically adjust excessive input levels (stereo-linking possible for 1/L and 2/R) - Delay function to adjust for distances between mics (+/-150 ms) - Mid-side decoding function enables the use of mid-side stereo mics - Slate tone functions (automatic/manual) - Selectable slate tone insertion points - File name format can be set to use a user-defined word or date - Dual recording function allows two files to be recorded simultaneously at different levels - Can start a new file automatically when a maximum file size set in advance is reached to continue recording - Track incrementing function allows a file to be split by creating a new file during recording when desired - Resume function remembers the playback position when the unit is turned off - Mark function allows up to 99 points to be added to a single recording
New Products Brand-new products are shipped from the vendor's factory to our warehouses, then from the warehouse to you – there's no detour through a retail store where the boxes are opened, and the products put on display and sold as leftovers. When you shop online, make sure you're comparing new, factory-fresh gear from authorized US dealers like zZounds.
Clearance Gear: Special Opportunities to Save Big! When It's Not New, We Tell You We occasionally have opportunities to buy B-stock merchandise from manufacturers. And sometimes, we get customer returns in less than perfect condition. We offer these products to you at special discounts – and we always identify it clearly using the classifications below. So unless it says otherwise, your product is new from the factory.
Warehouse Resealed Warehouse Resealed gear is typically a customer return. This inventory includes all parts, components, manuals (hard copy or downloadable) and the full factory warranty*. However, the packaging may be slightly compromised and thus not in absolutely perfect, unused condition like our new inventory. This inventory is a great value.
Blemished This is typically a customer return with minor cosmetic imperfections, such as superficial scratches or scuffs on the finish. This inventory includes all parts, components, manuals (hard copy or downloadable) and the full factory warranty*. It has been tested to manufacturer's specifications and is guaranteed to work perfectly. It may be less attractive than Warehouse Resealed inventory, but it's priced even lower! This inventory is a great value.
Scratch and Dent This is typically a customer return that shows general wear and tear, along with dents and scratches. This inventory includes all parts, components, manuals (hard copy or downloadable) and the full factory warranty*. It has been tested to manufacturer's specifications and is guaranteed to work perfectly, but will show signs of use. It may be less attractive than Blemished inventory, but it's priced even lower! This inventory is a great value.
Factory Resealed Factory Resealed gear is typically a purchase directly from the vendor, who may have used the product at a training session or at a trade show. It may also be a factory-refurbished product. This inventory includes all parts, components, manuals (hard copy or downloadable) and the full factory warranty*. However, the packaging may be slightly compromised and thus not in absolutely perfect, unused condition like our new inventory. This inventory is a great value.
B-Stock B-Stock gear is typically a purchase directly from the vendor, who may have used the product at a training session or at a trade show, or it may be a refurbished product. This inventory includes all parts, components, manuals (hard copy or downloadable) and the full factory warranty*. It has been tested to manufacturer's specifications and it is guaranteed to work perfectly, but it may have a cosmetic blemish. It may be less attractive than Warehouse or Factory Resealed inventory, but it's priced even lower! This inventory is a great value.
* Warranty coverage for non-new gear varies by manufacturer. Contact Us to see if this item includes a warranty.
At Same Day Music, we know you want your gear fast, and shipped to you free of charge. That’s why we ship orders 7 days a week, with absolutely free ground shipping on every order shipped within the continental United States. This includes heavy and oversized items. No minimum purchase required. No exclusions. Over 95% of orders arrive in 1-2 days! We pull it all off with our four warehouses located across the country, which we keep open late.
We guarantee your complete satisfaction for 30 days after your order is delivered.
We allow you to return almost any product for any reason. When returning a product, you can request an identical replacement item, exchange the product for another product, or request a refund. When procedures are followed, there are no restocking fees. For Canadian and U.S. territories customers, please note that if you request an exchange, we require the original item to be received and processed in our warehouse before shipping a replacement.